|Material:||PP,PE Pellets||Inverter Brand:||ABB|
|Warranty:||One Year||Sheet Thickness:||3-25mm|
|HS Code:||8477209000||Sheet Width:||1200mm|
HDPE Thick Sheet Extrusion Machine,
PLC Sheet Extrusion Machine,
25mm Plastic Sheet Extrusion Machine
Width of final product: 1200mm
Thickness range: 3-25mm
Extrusion Capacity: 300-450kg/hr (Max.)
AFSJ-150/30 Single- screw main extruder
The body of the gearbox is made from cast steel. The teeth deal with grinding and peeling eventually, which provides damping, antifriction, low-noise, long using period etc. characteristics.
Screw diameter: 150mm
L/D: 30: 1
Screw structure: special
Material: high quality nitrided steel-38CrMoAIA
Nitration depth: 0.3-0.6mm, hardness≧ 740HV,fragility is 2 grades.
Material: high quality nitrided steel-38CrMoAIA
Nitration depth: 0.4-0.7mm, hardness≧ 940HV,fragility is 2 grades.
Heating zones: 8 zones
The electric heaters are made of cast aluminum. Each electric heater has a specially designed tunnel for heat radiation.
The fans are featured with imported low lose and high effectiveness.
Power: 185 KW A.C motor ( ABB inverter control)
Fasten hydraulic pressure screen changer
Effective width: 1700mm
Material: adopt Japanese advanced heat proof alloy steel
The flows are plated chrome. And the flow surface is polished until it like mirror.
The outlets of the mould can be adjusted with the adjustable screws slightly.
Calender roll stack
Roll number: 3
Diameter of roll: 500mm
Roll length: 1700mm
Wall thickness of the roll: ≧25mm
Roll surface treatment: treatment of mirror polishing
The roll adopt Japanese alloy steel, and with hard chrome treatment, the hardness can reach RC60-65
12 rollers cooling sizing unit
Number of the steel rollers: 10
Roller length: 1700mm
Roller surface treatment: plated chrome and half-mirror polishing
Air cooling stand
Air cooling roller: 56 pcs
4 rollers haul off unit
Haul off rubber roller: 4 pcs
Diameter of the roller: 240mm
Length of the roller: 1700mm
Surface treatment: coated erosion resistance, heat resistance and friction resistance rubber and polished.
Clamping and open-close means: pneumatic
Cutting machine & stacker
Saw cutter: one set
PLC Control system: one set
Packaging and shipping
|PACKAGING||plastic film + stretch film + wooden case + drying agent.|
|DELIVERY||About 100 days (all new parts)|
|SHIPPING||We place and fix the machines well into container and check carefully before closing the container so as to ensure everything is ok for the shipment. (Use steel wire to fix machine and drying agent).
We care each and every point so that our clients could receive the machines in perfect situation.
What is our service system?
|PRE-SALE||a. Detailed machine introduction;
b. Suggest suitable turnkey solution as per clients requirements;
c. Provide test production for reference;
|IN PRODUCTION||a. Supply layout drawing to clients for preparation;
b. Suggest suitable building project for pipelines, electric wiring, air pipes, cooling cycle water etc;
c. Keep the clients be informed of the production status;
|AFTER SALE||a. Send engineers to overseas for installation ,commissioning and training;
b. Supply extruding products' material formula, recommend excellent supplier of the raw material per clients' requests;
c. Offer help if any need from clients like spare parts need etc;
d. Supply necessary technical support at request;
Why choose YAOAN MACHINERY?
1. Profession: YAOAN only make plastic extruder since 1980s, extensive experience and professional team ensure our leading position in plastic extruder industry.
2. Quality: The quality of products is footstone of enterprise's constant development, always endeavoring to do still better, quality comes first, developing & innovative is our responsibilities;
3. Delivery: We optimize factory management, and improve production flow so as to shorten production period for you in biggest extent;
4. Cost control: We do best to lower down production cost by our inner management improvement, so as to ensure that our products are competitive enough in market, and to realize higher performance-price ratio of our products.
Q1: What is the guarantee of the machine?
A1: The guarantee period of our machine is 12 months after the machine is installed well in buyer's factory;
Q2: What package do you use for the machine?
A2: Painted the machine with anti-corrosion oil, and then covered with plastic film, and then packed into wooden case or fixed onto wooden pallet as per clients' requirements, or shall be loaded into container with film packing. After fixed all machines, we will use drying agent to keep container inside dry.
Q3: Do you have instruction manual to guide us if i buy the machine?
A3: Yes, we supply detailed user manual for your reference. PLS read it carefully for guide. If there is still problem which could not be solved, PLS contact us, we are ready to help you anytime.
Q4: What is your service to overseas clients?
A4: We supply perfect overseas service. We shall send engineers to overseas for machine installation and commissioning and test production guide, and also training to the workers of the buyer. And we are ready to give technical support anytime.