AFSJ 65×30-300mm PE Cap Liner Foam Sheet Extrusion Machine, CE Certificate
- Processed material: granulated PE
- Width of finished product after slitted : 300mm
- Thickness of the finished product: 1-2.5 mm
Configuration and specification:
￠65mm extruder: one set
Gearbox: one set
The body of the gearbox is made from cast steel. The teeth deal with grinding and peeling eventually, which provides damping, antifriction, low-noise, long using period etc. characteristics.
The screw
Material: high quality nitride steel-38CrMoAIA
Nitration depth: 0.3-0.6mm, hardness≧ 740HV,fragility is 2 grades.
Material: high quality nitride steel-38CrMoAIA
Nitration depth: 0.4-0.7mm, hardness≧ 940HV,fragility is 2 grades.
Heating zones: 6 zones
The electric heater is made of cast aluminum. Every electric heater has a specially designed tunnel for heat radiation
The fans are featured with low lose and high effectiveness.
Main motor power: 45kw
AC motor with a inverter control
The whole temperature control system is of Japanese RKC.
Self-lock style forward and backward movement system
Screw diameter: 65mm
L/D: 30: 1
Screw structure: special
T-die: one set
Effective width:400mm
Material: super heat resistance alloy steel
The flows are plated chrome. And the flow surface is polished until it like mirror.
The outlets of the mould can be adjusted with the adjustable screws slightly.
There are 4 heating zones in the mould. Heating power in every zone: 3kw
The heat means: heating inside by bar heaters
Calender roll stack: one set
Structure: vertical style
Roll number: 3
Diameter of roll: 260mm
Roll length: 400mm
Wall thickness of the roll: ≧25mm
Roll surface treatment: 14 grade super treatment of mirror polishing
Structure of the rolls is of multi layer compound style oil exchange system, which provide good thermostat.
Media: water
Tolerance: ±1℃
The thermostat system controls temperature of the three rolls separately. The temperature of the three rolls can be adjusted individually. The transmission system is of individual control mould
Transmission power: 2.2kw×3=6.6kw
One emergency stop system: one
Precise adjusting system for the clearance between the three rolls.
Hydraulic pressure system for Clamping and open-close
Haul off unit: one set
Diameter of the roller: 160mm
Length of the roller: 400mm
Steel roll surface treatment: plated chrome and half-mirror polishing
Rubber roll surface treatment: coated erosion resistance, heat resistance and friction resistance rubber and polished.
Clamping and open-close means: pneumatic
Online slitting unit: one set
Slitting by disc blade
Two- shaft winder: one set
Shaft number: 2
Control by a high-grade torque motor
FAQ
1. Q: Are you a factory or trading company?
A: We are a factory and giving you the quickest reply in 24 hours.
2. Q: What's your company mainly in?
A: We are mainly produce Plastic Extruder, Vacuum Forming Machine for over 30 years.
Other machines have included machines in production line, such as luggage edge cutting machine and punching machine.
(We can produce total production line. )
3. Q: What's the material should have for our extruder machine( produce luggage purpose)
A: ABS. PC. PP.PE.PS.PET.HIPS granulates etc plastic material can do.
4. Q: How's your strength of your company?
A: Has a group of senior technical personnels, strong technical force, we have the
whole running system, including design, development, production, installation,service.
One year quality guarantee, life-time service.
5. Q: If your company has passed some certificates?
A: Yes, we have passed CE, ISO.
Your message must be between 20-3,000 characters!
